SERIR 50 is a perimeter intrusion detection system for the protection of flexible metal fences, such as chain link mesh fences or welded ones and semi-rigid panels. Deploys piezodynamic detectors which perceive the vibrations of the metal fence during an intrusion attempt for breaking through, climbing and cutting, including sporadic cuts (single cuts perfomed over time).

The system uses passive (non-powered) piezodynamic sensors supplied in pre-wired lines up to 50 metres long. Heavy-duty and versatile, SERIR 50 is suitable both for the protection of small residential perimeters (see in particular SERIR COMPACT 50) and for the protection of larger and complex perimeters.

SERIR 50 uses the DEA NET network to centralise the alarm signals and eventually transmit them via IP protocol to the monitoring software (PSIM, VMS).

01_slide_serir_50

01_slide_serir_cmp_50

02_slide_serir_50

02_slide_serir_cmp_50

03_slide_serir_50

03_slide_serir_cmp_50

04_slide_serir_50

04_slide_serir_cmp_50

05_slide_serir_50

06_slide_serir_50

KEY BENEFITS

Wind-proof piezodynamic technology

The piezodynamic detection technology provides the highest immunity to wind a fence-mounted detection system has ever offered.

Immunity to environmental disturbances

SERIR systems have a very high tolerance to adverse climatic events such as rain, snow and extreme temperatures, and to man-made factors such as roads, motorways and railways.

Compatible with the vegetation

SERIR detectors are compatible with high grass and bushes and can be even installed on fences completely covered with evergreen climbing plants.

24h protection

Working on the boundary of an estate, SERIR systems offer a round-the-clock protection letting people move freely inside the perimeter.

Prewired sensor-strings

All SERIR detectors are wired, sealed and tested at the factory to avoid on site possible wiring mistakes and to guarantee the tightness of all the junctions from dust, water and humidity.

Maximum laying flexibility.

The sensor-strings adapt themselves to the terrain conformation and to the direction of the perimeter, making it possible to follow bends and differences in level, avoid obstacles and overcome possible discontinuities along the fence.

Passive sensors

SERIR 50 sensor-strings do not contain active electronic components, therefore they do not require power and are immune to electrical and electronic faults.

Maximum laying flexibility

Specially designed for external use, SERIR 50 sensors and cables have a very high resistance to UV rays and extreme temperatures. The piezodynamic transducer of the sensor is virtually inexhaustible.

In addition...

New IP native processing boards

The new signal processing boards – one dual-zone and one four-zone – now have a USB port, an Ethernet interface for native support for IP networks, and a completely updated service software.

SERIR COMPACT 50

PERIMETER PROTECTION IN KITS

SERIR COMPACT 50 is a stand-alone version of SERIR 50 system and is supplied in a ready-to-install kit for the protection of a 50-metre perimeter. It is particularly suitable for the protection of small residential and commercial sites.